language
| PDF Export | |
Technical data:
Input voltage：AC220V
Frequency：50HZ
Dominant wavelength：253.7nm
Light source power：2×36W
Rated Power：68W-80W
Light Source：UV TUBE
Service Life：8000Hrs(It is recommended to replace the lamp tube before 8000hrs)
Human infrared sensing range：≤120º Taper angle
Human infrared front-on sensing distance：3～5m
Wireless remote control distance：20m
Colors：Black、White、Customize color
Measurement (LxWxH)：256x206x658 mm
Net Weight：3.5 kg
Description:
Adopt international advanced UV ultraviolet light source；
It can kill many kinds of microorganisms, including bacterial propagules, spores, mycobacteria, viruses, fungi, rickettsia and mycoplasma, etc. All surfaces, water and air contaminated by the above microorganisms can be sterilized by ultraviolet rays；
Exquisite design, practical and beautiful, can be portable, with a stand on the floor, easy to move；
The built-in human body infrared sensor realizes "light on when people walk away and off when people in", protecting the human body from the damage of ultraviolet light；
The UV lamp is detachable for easy replacement or maintenance.
Complies with CE authoritative certification and GB28235-2020 implementation standard；
The lamp holder is an imported part, which is safe and reliable；
Adopt high-efficiency electronic ballast；
Ultraviolet disinfection is adopted, which has of wide range, quick effect and no residue；
Using high purity quartz tube, high ultraviolet light transmittance, less light decay, can effectively improve the sterilization effect.
Wireless remote control signal is sensitive.
Panel operation, simple and intuitive, intelligent control indicator light, which can display a variety of working states, and has a digital display, which makes it more intuitive and easy to understand when using. It is equipped with a wireless remote control to meet remote control.
In the power-on state, press the start button (lamp switch button or wireless remote control) and the person is within the sensing range, and the lamp is turned off. After leaving for 10 seconds, the lamp starts to emit light normally, and it is in a sterilization state at this time.
Bactericidal time can be set, 15 min interval switching (min 15 min max 90 min).
Technical data:
Input voltage：AC220V
Frequency：50HZ
Dominant wavelength：253.7nm
Light source power：2×36W
Rated Power：68W-80W
Light Source：UV TUBE
Service Life：8000Hrs(It is recommended to replace the lamp tube before 8000hrs)
Human infrared sensing range：≤120º Taper angle
Human infrared front-on sensing distance：3～5m
Wireless remote control distance：20m
Colors：Black、White、Customize color
Measurement (LxWxH)：256x206x658 mm
Net Weight：3.5 kg
Description:
Adopt international advanced UV ultraviolet light source；
It can kill many kinds of microorganisms, including bacterial propagules, spores, mycobacteria, viruses, fungi, rickettsia and mycoplasma, etc. All surfaces, water and air contaminated by the above microorganisms can be sterilized by ultraviolet rays；
Exquisite design, practical and beautiful, can be portable, with a stand on the floor, easy to move；
The built-in human body infrared sensor realizes "light on when people walk away and off when people in", protecting the human body from the damage of ultraviolet light；
The UV lamp is detachable for easy replacement or maintenance.
Complies with CE authoritative certification and GB28235-2020 implementation standard；
The lamp holder is an imported part, which is safe and reliable；
Adopt high-efficiency electronic ballast；
Ultraviolet disinfection is adopted, which has of wide range, quick effect and no residue；
Using high purity quartz tube, high ultraviolet light transmittance, less light decay, can effectively improve the sterilization effect.
Wireless remote control signal is sensitive.
Panel operation, simple and intuitive, intelligent control indicator light, which can display a variety of working states, and has a digital display, which makes it more intuitive and easy to understand when using. It is equipped with a wireless remote control to meet remote control.
In the power-on state, press the start button (lamp switch button or wireless remote control) and the person is within the sensing range, and the lamp is turned off. After leaving for 10 seconds, the lamp starts to emit light normally, and it is in a sterilization state at this time.
Bactericidal time can be set, 15 min interval switching (min 15 min max 90 min).
